(800) 524-7161 Local Weather

Special Order · Over 20,000 lbs

Large-Capacity Boat Lifts Over 20,000 lbs

Our standard line tops out at 20,000 lbs. For cruisers, cat-hull boats, and yachts that need more, Econo Lift builds special-order lifts up to 32,000 lbs — engineered to your boat, with the same lifetime warranty and American-made construction.

Heavy-Duty, Built to Order

When 20,000 lbs Isn't Enough

Econo Lift's standard Meridian line covers the vast majority of boats on the water, all the way up to our 20,000 lb side mount (Model 2038HDB). But some boats — large cruisers, sport-fishing boats, and yachts — weigh more than any off-the-shelf lift can safely hold.

For those boats, we build special-order lifts above 20,000 lbs, up to a maximum of 32,000 lbs. These are heavy-duty systems engineered to your specific boat using the exact same materials, warranty, and USA-made construction as the rest of our line. Because we're a family-owned manufacturer and not a corporation, we can build to your requirements and stay competitive on price — often well below what the national brands charge for lifts in this class.

A special order is not the same as "custom." We build heavy-duty lifts to order for boats above 20,000 lbs — we don't design one-off lifts of any type on request. Availability and installation depend on your dealer.

Recent Builds

See a Special-Order Lift Up Close

A recent 26,000 lb special order, built at our Camdenton, Missouri facility — the same virgin-plastic tanks, USA hot-dip galvanized steel, and lifetime warranty as every Econo Lift.

26,000 lb Econo Lift special-order boat lift 26,000 lb Econo Lift special-order boat lift, close view 26,000 lb Econo Lift special-order boat lift on the water

What Fits

Boats That Need a Lift Over 20,000 lbs

We build special-order lifts from just over 20,000 lbs up to a maximum of 32,000 lbs — recent builds include 26,000 lb and 32,000 lb lifts. Almost every special order is for a cruiser, but cat-hull and large offshore boats are right at home too.

Most Common Cruisers

By far the most common special order we build. Cabin and day cruisers that sit heavy and deep — beyond what our standard 20,000 lb lift can hold.

Special Order Cat-Hull Boats

Catamaran-hull cruisers and performance boats whose wide stance needs a purpose-built cradle, with the arms and tanks spread to match.

Special Order Large Offshore Boats

Big offshore boats carrying heavy power, fuel, and gear that push past the standard capacity ceiling.

Pricing

How Much Does a Boat Lift Over 20,000 lbs Cost?

$30,000 – $45,000 Typical special-order range

Prices for large-capacity boat lifts and yacht lifts are rarely published, so anyone researching a "30,000 lb boat lift cost" usually comes up empty. We'd rather give you a straight answer: most special-order lifts between 20,000 and 32,000 lbs land in the $30,000 to $45,000 range, depending on capacity, mount type, and configuration.

This is a general estimate for planning only — not a quote. Your exact price depends on your boat, your slip, and your site. Request a special order quote below for a firm number.

Request a Special Order Quote

How It Works

The Special Order Process

  1. 1

    Tell us about your boat

    Share your boat make and model, approximate weight, length, and where it will be installed. The more detail, the faster we can scope it.

  2. 2

    We engineer it to your boat

    Your lift is built to spec using the same 100% virgin-plastic flotation tanks, USA hot-dip galvanized steel, and UHMW bushings as every Econo Lift — scaled to the capacity you need.

  3. 3

    Your dealer coordinates build & install

    Special-order lifts are built to order and fulfilled through participating dealers. Availability varies by dealer, and our team will help connect you with one who handles large-capacity orders.

Start a Special Order
A 26,000 lb Econo Lift special-order boat lift

A recent 26,000 lb special-order build.

Why Econo Lift

Big-Boat Capacity, Econo Lift Quality

The Same Lifetime Warranty

A special order is covered exactly like our standard line — a lifetime original-purchaser warranty on tanks and bushings.

100% Virgin-Plastic Tanks

Rotationally molded as seamless, single-piece flotation tanks — no seams or welds to crack or leak, at any capacity.

USA Hot-Dip Galvanized Steel

Every frame is fabricated at our Camdenton, Missouri facility — not imported — for long-term corrosion resistance.

Engineered to Your Boat

No off-the-shelf compromise. The cradle, arms, and tank configuration are matched to your hull and slip.

Competitive on Price

Build quality that rivals the national brands in this class, without the premium price tag they attach to it.

Built to Order

Configured for your exact boat, dock setup, and slip size — right down to mount type.

Industry-Leading Protection

Our Warranty Promise

As of 2024, Econo Lift offers a lifetime original purchaser warranty on all bushings, ensuring long-lasting durability. Compare that to competitors' 10-year tank warranties!

5 YearHot-Dip Galvanized SteelFull immersion galvanization process
3 YearMotors, Valves & HoseAll mechanical & hydraulic components

Get Started

Request a Special Order Lift

Tell us about your boat and where it's headed. Because these are big-ticket, built-to-order lifts, our team (or your dealer) will follow up directly to work through the details.

Request a Special Order Lift

For boats over 20,000 lbs. Tell us about your boat and we'll follow up to scope your lift.

Get Started Today

Find the Perfect Lift for Your Boat

Family-owned and American-made since 1984 — our team is ready to help you choose the right lift.

Call Us