Econo Lift Meridian 8,000 lb — Front Mount
The Econo Lift Meridian 8,000 lb Front Mount is a large-capacity front-mount lift for center consoles, cruisers, and other big boats where attaching along the sides of the slip is not an option. Two full-size flotation tanks raise and hold up to 8,000 pounds, and loading is as easy as pulling onto a trailer.
Front mounting attaches the lift at the front of the slip rather than along both sides, which makes it the right choice for open-front slips, seawalls, and layouts where a side mount will not fit. The rear tank submerges first when air is vented, tipping the cradle to guide the boat on and off. The frame is available in 24 and 28 foot lengths for slips 9 feet and wider.
Like every Econo Lift, the Meridian 8,000 lb Front Mount is built at our family-owned facility in Camdenton, Missouri, using USA-sourced hot-dip galvanized steel and our own rotationally molded flotation tanks. It is not imported.
Learn more about our lift featuresFitment
What boats fit on a 8,000 lb lift?
At 8,000 pounds of capacity on a front-mount frame, the Meridian 8,000 lb Front Mount handles big boats in slips where a side mount cannot attach. It comfortably accommodates:
- Center consoles with heavy outboard packages and full fuel and gear loads
- Cabin cruisers and larger day cruisers that sit deep and carry their weight aft
- Wake boats that take on ballast for surf and wake performance
- High-performance bow riders with bigger power and longer hulls
- Larger tritoons whose three tubes need a wide, well-supported cradle
- Catamarans and catamaran-hull boats with a wide stance
Front mounting is the answer when you cannot attach along both sides of the slip. Size to your boat's wet weight, with fuel, water, batteries, and gear.
Specifications
Specifications, explained
Two full-size rotationally molded tanks provide the buoyancy to raise an 8,000 lb load. The rear tank submerges first when air is vented, tipping the cradle for easy bow-in loading.
The frame comes in two lengths to match your boat, and front mounting attaches at the front of the slip rather than along both sides.
Front mounting is ideal when side attachment is not possible, such as open-front slips and seawalls.
This is the standard 8,000 lb front mount. For a smaller front-mount boat, the Meridian 4,500 lb Front Mount takes the same approach. In rough, open water, the Surge 8,000 lb is a side-mount rough-water option at this capacity.
Built to Last
Engineering & Materials
Every Meridian 8,000 lb Front Mount is backed by a lifetime original-purchaser warranty on the polyethylene tanks and bushings, a 5-year warranty on all hot-dip galvanized steel, and a 3-year warranty on the motors, valves, and hoses.
FAQ
Frequently Asked Questions
What is a front mount boat lift, and when do I need one?
A front mount attaches at the front of the slip rather than along both sides, so it is the right choice when side attachment is not possible, such as open-front slips and seawalls. On the Meridian 8,000 lb, the rear tank submerges first when air is vented, so loading is as easy as pulling onto a trailer.
What size boat fits on the 8,000 lb front mount?
Center consoles, cabin cruisers, wake boats, high-performance bow riders, larger tritoons, and catamarans. Size the lift to your boat's wet weight, with a full fuel tank, water, and gear.
What size slip does it need?
Front mounting fits slips 9 feet and wider, and the frame is available in 24 and 28 foot lengths to match your boat.
How many tanks does it have?
Two rotationally molded polyethylene tanks (7' x 8' x 2'). The rear tank submerges first when air is vented, tipping the cradle for easy bow-in loading.
Front mount or side mount, which do I need?
Choose a front mount when you cannot attach along both sides of the slip. See our front mount boat lifts overview for the full range. For rough, open water at this capacity, the Surge 8,000 lb is a side-mount rough-water lift.
What warranty comes with it, and where is it made?
A lifetime original-purchaser warranty on the polyethylene tanks and bushings, a 5-year warranty on all hot-dip galvanized steel, and a 3-year warranty on the motors, valves, and hoses. It is built in Camdenton, Missouri with USA-sourced steel. See our full warranty details.
Industry-Leading Protection
Our Warranty Promise
As of 2024, Econo Lift offers a lifetime original purchaser warranty on all bushings, ensuring long-lasting durability. Compare that to competitors' 10-year tank warranties!
Similar Lifts
You Might Also Like
Get a Quote for This Lift
Fill out the form below and we'll get back to you with pricing and availability.